Design, Manufacturing & Installation Of
Acoustic Louvres & Attenuators
Sponmech offer a comprehensive design, manufacture, and installation service of acoustic louvres and attenuators.
Kindly note that we do not quote from data sheets. Please read on for further information regards obtaining our quotation.
Acoustic louvres are usually designed to go on the outside of our acoustic enclosure to help with air flow.
All acoustic louvres designed and manufactured by Sponmech conform to BS EN ISO 15667:2000 Noise Control by Enclosures and Cabins and are fully HSE compliant.
Acoustic attenuators allow for air to pass through the acoustic enclosure or sound booth whilst dampening sound. Inside the attenuators there is a component that acts like a baffle – sound will enter but it will be muffled by the attenuators to reduce sound.
All attenuators designed and manufactured by Sponmech conform to BS EN ISO 15667:2000 Noise Control by Enclosures and Cabins and are fully HSE compliant.
To get a quote
Sponmech can only quote with enough/suitable information provided by you. For example you could make reference to an enclosure type on our website or provide us with your or your customer's Sketch or drawings of the enclosure and/or photos of the equipment on site.
- We do not allocate our designers or engineers onto a job until the point of order.
- We do not quote from specification data sheets.
Please do use the enquiry form below on this page to give us enough information as possible to quote. Alternatively please email us and we can send you a questionnaire with all the information we need to know to quote you.
Why use Sponmech for Acoustic Louvres & Attenuators
- Accredited noise consultants
- SafeContractor Approved
- Largest manufacturer In the Midlands
- All enclosures come with certificates of conformity
- All acoustic enclosures delivered and installed
- Experts In reducing dB levels
- HSE compliant
- Noise solutions for all industries
- Sponmech has a quality management system to BS EN ISO 9001:2015
- All engineers are accredited, safety trained & carry national safety passports
Just wanted to thank you for an excellent service – on time/on budget delivery of the sound enclosure to specification.
Jerry Southan, Otter Controls Ltd
Excellent service – on time/on budget deliveryFrom the initial enquiry to the final installation I found Sponmech a very professional organisation to deal with.
They have already supplied a second enclosure, and are awaiting our instruction to install.
The fitters who attended or site were obviously very experienced and followed our site H&S rules without a hitch.
The tooling we run in the can get over the 100 dB, and although we have not carried out a final noise evaluation, the enclosure does make a big difference.
Simon Brace, Senior Engineer
Sponmech are a very professional organisation to deal withQuality product, delivered on time by friendly, efficient people -
just what we need
Steve Leadbeater
Purchasing ManagerThe quality of product and service that we have received from Sponmech over the last 10 years has been outstanding even on very short lead times. We would not hesitate recommending them for any guarding application.
Brian Clift
Design EngineerWe have been working with Sponmech Safety Systems for more than 15 years now and are very pleased with the service they provide. Quality is excellent and response times are very good, from providing the quotation through to delivery of the equipment and support thereafter. We would have no hesitation is recommending Sponmech Safety Systems for the supply of guarding and safety systems.
Engineering Manager
Mark Arbon
